Differences

This shows you the differences between two versions of the page.

--- gui [2025/02/18 12:36] – pklapetek
+++ gui [2025/04/01 13:54] (current) – pklapetek
@@ Line 1: / Line 1: @@
+====== Gwyscope GUI overview ======
 Gwyscope is primarily designed to allow development of user's own interface, i.e. a client which connects to the server running on the hardware. A sample graphical user interface described in this section is only one of all the possible realizations of such client and therefore is far from being complete and optimized.
-The interface includes the following controls and views:
+The GUI addresses:
+  * Set up of most typical measurement regimes (contact, tapping) and probe types (optical lever, self-sensing).
+  * Scanning using regular or non-regular scan patterns.
+  * Multiple path measurements (lift regimes).
+  * Point spectroscopy measurements and force volume data acquision.
+  * LUA scripting interface for autonomous measurements.
+  * Basic visualisation of scanned data, profiles and force-distance curves.
+  * Storage of all the data into [[https://gwyddion.net|Gwyddion]] files.
+An example of the GUI, when measuring FM-KPFM data, is shown below:
+{{ :gui.png?direct&600 |}}
+The key parts of the GUI are:
+  * Feedback loop settings area, where measurement regime can be selected and its parameters entered.
+  * Scan settings area, where different scan regimes can be set.
+  * Four data previews, with channels automatically generated from the scanning mode (plus user controlled number of slow ADC input channels).
+  * Two graphs, showing either actual signals (default regime), actual scan line (when scanning) or actual ramp (when ramping), with the same set of channels.