Differences

This shows you the differences between two versions of the page.

--- gui [2025/02/25 14:45] – pklapetek
+++ gui [2026/06/01 15:09] (current) – pklapetek
@@ Line 9: / Line 9: @@
   * Multiple path measurements (lift regimes).
   * Point spectroscopy measurements and force volume data acquision.
-  * LUA scripting interface for autonomous measurements.
+  * [[https://lua.org/|Lua]] scripting interface for autonomous measurements.
   * Basic visualisation of scanned data, profiles and force-distance curves.
   * Storage of all the data into [[https://gwyddion.net|Gwyddion]] files.
@@ Line 16: / Line 16: @@
 {{ :gui.png?direct&600 |}}
+The key parts of the GUI are:
+  * Feedback loop settings area, where measurement regime can be selected and its parameters entered.
+  * Scan settings area, where different scan regimes can be set.
+  * Four data previews, with channels automatically generated from the scanning mode (plus user controlled number of slow ADC input channels).
+  * Two graphs, showing either actual signals (default regime), actual scan line (when scanning) or actual ramp (when ramping), with the same set of channels.