Gwyscope documentation

open hardware SPM controller with advanced sampling support

User Tools

Site Tools

Trace:
hwboxserver

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
hwboxserver [2025/02/20 13:57] – adminhwboxserver [2025/02/25 14:44] (current) – pklapetek
Line 1: Line 1:
 +====== Hwserver ======
 +
 +
 The concept of Gwyscope is based on a server-client approach, i.e. a server - hwserver - is used to control all the hardware based on commands received from a client (e.g. Gwyscope GUI). Default hwserver installation is ''/root/gwyhwserver_gwyscope''. The server can be started after login to the Red Pitaya from the command line, providing port number for client connection and (optionally) .ini file with initial parameters settings. For example The concept of Gwyscope is based on a server-client approach, i.e. a server - hwserver - is used to control all the hardware based on commands received from a client (e.g. Gwyscope GUI). Default hwserver installation is ''/root/gwyhwserver_gwyscope''. The server can be started after login to the Red Pitaya from the command line, providing port number for client connection and (optionally) .ini file with initial parameters settings. For example
  
hwboxserver.1740056252.txt.gz · Last modified: 2025/02/20 13:57 by admin