Gwyscope documentation

open hardware SPM controller with advanced sampling support

User Tools

Site Tools

Trace: • hwstart
hwsetup

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
hwsetup [2025/02/21 09:20] – adminhwsetup [2025/02/25 14:41] (current) – pklapetek
Line 1: Line 1:
 +====== Connection to SPM ======
 +
 +
 Gwyscope hardware itself is not enough to perform SPM measurements, it is only the Digital Signal Processor for it. To run a SPM experiment with Gwyscope, you need a microscope hardware and some electronics: usually at least some kind of probe-sample force detection electronics and piezo amplifiers. Gwyscope hardware itself is not enough to perform SPM measurements, it is only the Digital Signal Processor for it. To run a SPM experiment with Gwyscope, you need a microscope hardware and some electronics: usually at least some kind of probe-sample force detection electronics and piezo amplifiers.
  
hwsetup.1740126033.txt.gz · Last modified: 2025/02/21 09:20 by admin