simple_connect
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revision | |||
| simple_connect [2026/05/26 14:09] – pklapetek | simple_connect [2026/06/01 15:08] (current) – pklapetek | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ===== Connection test ===== | ===== Connection test ===== | ||
| - | This simple client connects to the Gwyscope server and gets raw information about server start time. After that it reads 20 values of what is the actual “error signal” and exits. It can be used to learn how to set up the connection over Ethernet and how the Gwyfile object based messages used for communication are set up and passed through the connection. | + | This simple |
| + | |||
| + | It connects to the Gwyscope server and gets raw information about server start time. After that it reads 20 values of what is the actual “error signal” and exits. It can be used to learn how to set up the connection over Ethernet and how the Gwyfile object based messages used for communication are set up and passed through the connection. | ||
| Used commands and their parameters: | Used commands and their parameters: | ||
simple_connect.txt · Last modified: 2026/06/01 15:08 by pklapetek