Differences

This shows you the differences between two versions of the page.

--- simple_connect [2026/05/26 14:03] – pklapetek
+++ simple_connect [2026/06/01 15:08] (current) – pklapetek
@@ Line 1: / Line 1: @@
 ===== Connection test =====
-This simple client connects to the Gwyscope server and gets raw information about server start time. After that it reads 20 values of what is the actual “error signal” and exits.
+This simple clients tests the client-server connection.
-Used commands:
+It connects to the Gwyscope server and gets raw information about server start time. After that it reads 20 values of what is the actual “error signal” and exits. It can be used to learn how to set up the connection over Ethernet and how the Gwyfile object based messages used for communication are set up and passed through the connection.
+Used commands and their parameters:
 ''get: hwtime'', for accessing the server start time
@@ Line 10: / Line 12: @@
 Note that as the “error signal” depends on the actual operation regime, also called “mode” (proportional feedback, amplitude feedback, etc.), as defined in hwserver.ini file on the server, the reported value of error signal can have different meanings, to control it, set also “state” command as in the next examples. Similarly, the setpoint parameter and PID settings depend on actual realisation of the feedback loop, direction of the signals defined in hwserver.ini, etc.
+To explore it further, see the [[https://sourceforge.net/p/gwyscope/code/HEAD/tree/simple_clients_c/|simple client implementations in C]] and [[https://sourceforge.net/p/gwyscope/code/HEAD/tree/simple_clients_python/|in Python]].