simple_ramp
Differences
This shows you the differences between two versions of the page.
| simple_ramp [2026/05/26 14:33] – created pklapetek | simple_ramp [2026/06/01 15:06] (current) – pklapetek | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ===== Ramp ===== | ===== Ramp ===== | ||
| - | This simple client connects to the server and sets the operation regime to proportional feedback (typically used in contact mode, difference between value of signal on input and some setpoint value makes piezo to extend or shrink, depending on settings). Then it sets some basic parameters of feedback loop and sets feedback on. After that it runs a ramp (a force-distance curve) and prints it (in C) or shows it (in Python), Finally, it stops the feedback, shrinks the z-piezo and exits. | + | This simple client |
| + | |||
| + | It connects to the server and sets the operation regime to proportional feedback (typically used in contact mode, difference between value of signal on input and some setpoint value makes piezo to extend or shrink, depending on settings). Then it sets some basic parameters of feedback loop and sets feedback on. After that it runs a ramp (a force-distance curve) and prints it (in C) or shows it (in Python), Finally, it stops the feedback, shrinks the z-piezo and exits. | ||
| Used commands and their parameters: | Used commands and their parameters: | ||
simple_ramp.1779798812.txt.gz · Last modified: 2026/05/26 14:33 by pklapetek