Differences

This shows you the differences between two versions of the page.

--- guistart [2025/02/20 17:16] – admin
+++ guistart [2025/02/25 12:17] (current) – pklapetek
@@ Line 1: / Line 1: @@
+====== Gwyscope GUI installation ======
 Graphical user interface is designed to be run on user's computer (not on the Gwyscope boards). The computer has to be connected to a network as the GUI connects to Gwyscope boards using Ethernet interface.
@@ Line 65: / Line 67: @@
 Gwyscope tries to connect to the hwserver using default IP address and port. This has to be changed according to the local configuration. Close Gwyscope, open ''C:\Users\username\.gwyscope\gwyscope.ini'' file and modify the first two parameters (''hardware_server'' and ''port'') according to your setup. Note that the ''username'' in the .ini file path has to be changed too. Now start the hwserver (see [[hwboxserver|Starting hwserver]] for details) and run the Gwyscope GUI again. If a successful connection is established, you should see in the debug console ''starting hw loop, server ...'', otherwise ''Cannot send message'' or ''Cannot connect to address...'' messages are printed.
 {{ :wiki:gui:gwyscope_gui_win_connect.png?400 }}
+**Development** version is available from Sourceforge repository [[https://sourceforge.net/p/gwyscope/code/HEAD/tree/gwyscope/|here]]. Currently, we use MS Visual Studio 2022 for source files compilation. Solution and project files are stored in the msvc2022 directory. In order to checkout source files from the repository, the [[https://tortoisesvn.net/|TortoiseSVN]] package is recommended. Note that there are several dependencies (Gwyddion, GTK, libgwyscan and Python2.7) that have to be also installed. Details will be provided upon request. Ask <petr.grolich@cmi.gov.cz> for assistance.