Differences

This shows you the differences between two versions of the page.

--- hwperifpico [2025/02/27 08:55] – admin
+++ hwperifpico [2025/02/27 08:58] (current) – admin
@@ Line 27: / Line 27: @@
 </code>
-In the directory, there is a simple Python script ''pico.py'' that tests if all the packages are installed correctly and tries to connect to the Picomotor controller and to write it's ID. Note that the IP address of the controller has to be known. It can viewed or set using [[https://www.newport.com/medias/sys_master/software/software/h4b/he7/9139939803166/PicomotorApp-2.1.5.zip|PicomotorApp]]. Note however that the software is available for Windows OS only. If testing with the pico.py utility was successful, the pmserver  can be started providing port number (50101) and .ini file (hwserver_sample.ini):
+In the directory, there is a simple Python script ''pico.py'' that tests if all the packages are installed correctly and tries to connect to the Picomotor controller and to print out it's ID. Note that the IP address of the controller has to be known. It can be viewed or set using [[https://www.newport.com/medias/sys_master/software/software/h4b/he7/9139939803166/PicomotorApp-2.1.5.zip|PicomotorApp]]. Note however that the software is available for Windows OS only. If testing with the pico.py utility was successful, the pmserver  can be started providing port number (50101) and .ini file (hwserver_sample.ini):
 <code>